Description

The WARP-15 is an AR15 style receiver made from injection molded glass filled nylon incorporating the buttstock, buffer tube, pistol grip, and trigger into the receiver design as integral components.  The WARP-15 Receiver draws inspiration and experience from earlier monolithic polymer receiver designs while incorporating modern manufacturing techniques and features for the current marketplace. This manufacturing process offers several advantages Lighter weight compared to similarly configured receivers Lower cost to similarly configured receivers Increased production speed and elimination of sub components through integration especially important during high demand cycles in the market. Features Include: Compatibility with most common AR15 uppers and lower parts kits Flared magwell to make reloads under stress easier to perform. A1 Length 13” Length of Pull (LOP) Buttstock to fit a wide range of shooters MLOK Slots at rear of stock for sling attachement points or run a strap through it for simple sling attachment Holes at the front of the stock for QD socket inserts for more sling attachment options Wraithworks Exclusive Heavy Texture Pistol Grip Wraithworks Exclusive injection molded buttplate w/ trap door Technical Information The WARP-15 receiver uses a Carbine buffer and spring The Take Down and Pivot Pins have the detents built into them eliminating the spring and detent holes in the lower increases durability. The Selector spring and detent load from the top, then the selector slides over it. The buffer detent (should you choose to use it) is held in place with a 5/64” Roll Pin The WARP-15 is compatible with all Mil-Spec Fire Control Groups The WARP-15 is compatible with cassette style match triggers included the KE Arms DMR and SLT units. The retention system of these triggers with D-Clips in the bushings to retain the fire control pins makes them better suited for use in the WARP-15 than other designs that require captured pins. The hammer pin area is wider for durability Standard AR15 hammer pins can still be used but we offer a longer hammer pin for customers preferring a flush pin for aesthetic reasons