Description

Lever guns are as cool as can be – and more people are adding low-power or red-dot optics all the time.

This design made from a single piece of T7075 aluminum and machined in house on our world-class CNC machining centers is designed to fit precisely and strong enough that your rifle will never budge it.. Bases will come Type III black hardcoat anodized and will come with the necessary wrench.

Recommended torque spec: 15 in/lb

Our rails are available for the 3 or 4-screw receivers in 0MOA.

FIT GUIDE
FOUR-SCREW (Long Action) will fit the following Henry models:
H009 H009G H009B H009AW H009GAW H009CC H009GCC H009X H009WL H009GWL H009BWL
H010 H010G H010B H010AW H010GAW H010CC H010GCC H010X H010WL H010GWL H010BWL
H018-410 (with drilled and tapped receivers) H018-410R H018AH-410
H024-3030 H024-35 H024-3855 H024-4570
Please note that this base will only fit H018-410 models with drilled and tapped receivers.

THREE-SCREW (Short Action) fits:
H006 (must be 2nd Gen with drilled/tapped receiver) and H012 Series hole spacing only.
Will fit the following Henry models:
H006 H006R H006M H006MR H006C H006CR H006S H006MS H006CS H006ML H006MML H006CML H006D H006D2 H006D3 H006D4 H006ES H006TT H006OM H006GBA
H012 H012G H012R H012GR H012AW H012GAW H012CC H012RCC H012GRCC H012GCC H012M H012GM H012MAW H012GMAW H012MRCC H012GMRCC H012MCC H012GMCC H012C H012GC H012CRCC H012GCRCC H012CAW H012GCAW H012CCC H012GCCC H012X H012MX H012CX